Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
• DO NOT USE ON LIVE CIRCUITS. DISCONNECT POWER. Metal tip on rod.
• Wear safety glasses and gloves.
• Keep rod inside reel when not in use. Out-of-control rod can harm personnel or property.
• Keep rod clean. Some contaminants (including water) can conduct electricity.
• Keep secure footing. Protect yourself from falling should pulling eye move suddenly or separate from rod.
• Check for rod damage prior to use. Cracks, gouges, nicks, or white stress marks on jacket or sharp bends will weaken rod. Injury could result if rod breaks while pulling.
• Do not use slip joint pliers, locking pliers or powered pulling equipment on rod.
• Do not force a pull that is stuck. Check for kinks or obstructions.
• Avoid pulling rod over sharp edges.
• Do not bend rod beyond 4" radius.
Read manufacturer's instructions before using adhesive. In case of eye contact, flush with water and seek medical attention If skin contact occurs, apply solvent (such
as nail polish remover) to area and gently remove adhesive. Wash solvent off with water. Solvents should not be used in case of contact with eyes or open wounds.
Always wear safety goggles (ANSI Std. Z87.1) and gloves when working with adhesive and/or unprotected fiberglass rod. See adhesive product label for Safety Data
Sheet (SDS).
Jameson products carry a warranty against any defect in material and workmanship for a period of one year from date of shipment unless failure is due to misuse or
improper application. Jameson shall in no event be responsible or liable for modifications, alterations, misapplications or repairs made to its products by purchaser
or others. This warranty is limited to repair or replacement of the product and does not include reimbursement for shipping or other expenses incurred. Jameson
disclaims any other express or implied warranty.
3/8" GOOD BUDDY
400' - 1,000'
Part Number
11A-25-400M
11A-25-500M
11A-25-600M
11-25-1000M*
*(Built on Big Buddy frame)
WARNING
WARNING - ADHESIVE
WARRANTY
OPERATION AND
SAFETY MANUAL
II RODDER
®
EZ-REEl™
Replacement
11A-400RRM
Good Buddy® II Conduit Rodder, 3/8" x 400', Marked Every 5'
11A-500RRM
Good Buddy® II Conduit Rodder, 3/8" x 500', Marked Every 5'
11A-600RRM
Good Buddy® II Conduit Rodder, 3/8" x 600', Marked Every 5'
11-25-1000RRM
Good Buddy® II Conduit Rodder, 3/8" x 1000', Marked Every 5'
|
800.346.1956
JAMESONTOOLS.COM
Description
1
Publicidad
Manuales relacionados para Jameson 11A-25-400M
Resumen de contenidos para Jameson 11A-25-400M
- Página 1 WARRANTY Jameson products carry a warranty against any defect in material and workmanship for a period of one year from date of shipment unless failure is due to misuse or improper application. Jameson shall in no event be responsible or liable for modifications, alterations, misapplications or repairs made to its products by purchaser or others.
- Página 2 ACCESSORIES Roller Swivel Swivel Eye Shackle Stinger Tip Guide Coupling Replacement All Terrain Wheels Good Buddy® II Grapples Accessory Kit Part Number Accessories Description 9-25-AK or 9-25-AK-R Accessory Kit Canvas Pouch - Swivel Pulling Eye, Splice Ferrule, End Ferrule, Adhesive and Emery Cloth 9-139 Swivel Eye Attach pull line or grip to freely rotating eye...
- Página 3 Connecting Two Rodders For Long Runs With Swivel Coupling If job requires more rod than is on reel, you can use an additional reel with rod and attach this rod to existing rod. Using Swivel Coupling, attach the beginning of new rod to end of already installed rod. Connecting Two Rodders For Long Runs With Grapples 1.
- Página 4 DUCT RODDER SAFETY TIPS POSITION FOR USE WARNING When rod is engaged with twin roller guides, the spring tension in the rod will naturally result in rod paying out and reel rotating. Ensure brake is engaged as required to prevent injury. Wear safety glasses and gloves at all times. •...
- Página 5 GARANTÍA Los productos Jameson tienen una garantía contra cualquier defecto en el material y la confección por un período de un año a partir de la fecha de envío, a menos que la falla se deba a un uso indebido o una aplicación no autorizada. Jameson no se hará responsable en ningún caso de las modifi caciones, alteraciones, aplicaciones indebidas o reparaciones hechas a sus productos por parte del comprador u otros.
- Página 6 ACCESORIOS Ojal Guía de Acople Grillete Punta de punzón giratorio rodillo giratorio Rueda todo terreno Grapas Kit de reparación Part Number Accessories Description 9-25-AK or 9-25-AK-R Estuche de accesorios Estuche de lona: ojo de tracción giratorio, férula de empalme, férula fi nal, adhesivo y tela de esmeril 9-139 Ojo giratorio Fije la línea de tracción o el agarre al ojo que gira libremente...
- Página 7 Cómo conectar dos guías pasacables con acople giratorio para recorridos largos Si el trabajo requiere más varilla de la que hay en la bobina, puede usar una bobina adicional con varilla y acoplar esta varilla a la existente. Usando el acople giratorio, acople el principio de la varilla nueva al extremo final de la varilla ya instalada. Cómo conectar dos guías pasacables con grapas para recorridos largos 1.
- Página 8 CONSEJOS DE SEGURIDAD DE DUCT RODDER POSICIÓN DE USO ADVERTENCIA Cuando la caña está acoplada con guías de rodillos gemelos, la tensión del resorte en la caña naturalmente hará que la caña se desplace y el carrete gire. Asegurar el freno está accionado según sea necesario para evitar lesiones. Use gafas de seguridad y guantes en todo momento. •...