Xiaomi smartmi Standing Fan 3 Manual De Usuario página 9

Installation
Connecting to power supply/charging the battery
Plug one end of the power cord into the power port on the back of the base
and the other end into a power supply to connect the power supply and
charge the battery.
There is a battery contained inside the fan base. When it is sufficiently
charged, the power cord can be unplugged and the device can be used
independently.
If the battery is installed and the fan is connected to a power supply, no
battery power will be consumed while it is running, and the battery will be
charged to full capacity.
Charging
When the battery level is between 0%–90%, the indicator light is orange and
slowly fades off in 20 seconds.
When the battery level is between 91%–100%, the indicator light remains
solid green for 20 seconds.
Operating on the battery
Power port
Indicator status Battery level
Green light solid
21%-100%
for 20 seconds
Orange light solid 11%-20%
Orange light
0%-10%
blinking
Connect with Mi Home / Xiaomi Home App
This product works with Mi Home / Xiaomi Home app*. Control
your device with Mi Home / Xiaomi Home app.
Scan the QR code to download and
install the app. You will be directed to
the connection setup page if the app is
installed already. Or search "Mi Home
/ Xiaomi Home" in the app Store to
download and install it.
* The app is referred to as Xiaomi Home
app in Europe (except for Russia). The
name of the app displayed on your device
should be taken as the default.
Open Mi Home / Xiaomi Home app, tap "+" on the upper right,
and then follow prompts to add your device.
Note: The version of the app might have been updated, please
follow the instructions based on the current app version.
8