3 Connect your Mobile Station WLAN to this WLAN as
described in the instructions for the Mobile Station.
4 When a connection has been set up with the WLAN Box,
the reset button will briefly flash green.
Operation
Together with a Track Box, the 60117 WLAN Box creates the
connection between the 60667 Mobile Station and a model
railroad. The operation of the model railroad is controlled
with the Mobile Station.
During operation, the button on the 60117 WLAN Box indi-
cates whether the layout is at GO (green) or at STOP (red).
This status can be switched moreover by pressing briefly on
the button.
The operation of the model railroad is controlled with the
Mobile Station WLAN.
Infrared Controllers
The 60117 WLAN Box can also receive and process signals
from the Start-Up infrared controllers. Locomotive addres-
ses to be assigned to the infrared controller can be set in
the Web Interface.
Reset
A reset can be activated on the WLAN Box by pressing
a long time (10 seconds) on the button. This will reset the
WLAN Box to the default factory settings. All settings, which
have been done, are thereby discarded.
Web Interface
A Smartphone or a PC (with WLAN) can access the WLAN
Box as long as the 60117 WLAN Box is not connected to the
60667 Mobile Station WLAN.
Address: 192.168.160.1
or: wica.local
When a connection has been set up with the WLAN Box, the
reset button will briefly flash green.
Several settings can be done on the device in the interface
shown in the browser. A previously downloaded update
for the WLAN Box can also be installed here among other
things. The LED blinks alternately in red and green during
the update. The controller should not be turned off during
the update.
Simplified Conformity Declaration
Gebr. Märklin & Cie GmbH hereby declares that the radio in-
stallation, item number 60117, adheres to Guideline 2014/53/
EU. The complete text of the EU conformity declaration is
available at the following Internet address under „Down-
loads": https://www.maerklin.de/produkte/60117
9