Orbegozo CP 12435 Manual De Instrucciones página 13

CP 12435
MOUNTING OPTIONS
Option A: For mounting to wood ceilings use wood screws along with washers screwed directly into the
ceiling.
Option B: For cement or concrete roofs use the nylon plugs provided with the lag screws:
1. Place the bracket in the chosen location and mark the four anchor points of the bracket.
2. Drill the holes with a 6mm wall drill bit.
3. Insert the nylon plugs.
4. Screw the support with the lag screws.
INSTALLATION
Step 1: Wiring.
A. Connect the black PHASE wire marked with an "L" to the PHASE wire (usually brown, gray or black) of the
house installation.
B. Connect the white NEUTRAL wire marked "N" with the NEUTRAL wire (usually blue) of the house
installation.
C. Connect the yellow and green EARTH wire with the EARTH wire (usually yellow and green) of the house
installation.
13