Svan Bouncer Manual Del Usuario página 6

Bouncer-manual.qxd
Step 5: Insert the Arch into the Floor base holes
Step 6: Secure the Fabric to the Floor base
Clean the wooden parts of the bouncer with a damp cloth or cleaner that is suitable for
wooden furniture. Be sure to dry all wooden part thoroughly after spills and cleaning.
The Svan Bouncer fabric parts are machine washable in 104°F (40°C) on the delicate cycle
and can be tumble dried.
06-05-04 15.26 Sida 6
Tilt the frame slightly forward and insert the ends of the Arch
into the rectangular holes of the Floor base. After the Arch is
successfully inserted into the holes, release the Arch backwards
(away from the bent part of the Floor base) so that it rests on the
flat surface of the Floor base.
The Cloth must be secured to the Floor base by the straps.
Simply pull the straps which lead out from the lower end sides
of the Fabric, to the underside of the Floor base and attach with
the snaps.
Attach the two (2) snaps on the front piece of the Fabric to the
bent part of the Floor base.
Washing Instructions
Before you wash the Fabric part of the bouncer there are a few
things to do:
1 Unsecure the Fabric from the Floor base by unsnapping the
two (2) straps and the two (2) snaps in the front.
2 Remove the Fabric from the Arch by unsnapping the eleven
(11) buttons.
3 Unsnap the Backrest from the Fabric and pull out the Backrest.
4 Pull out the Laths (see image below) from the cloth body.
– 6 –