Publicidad
Idiomas disponibles
Idiomas disponibles
minimum clearance of 30 cm from any wall of the unit. Keep the unit away from
any hot surfaces. Always operate the unit on a level, stable, clean, fireproof and
dry surface and out of the reach of children and persons of impaired mental,
sensory and intellectual functions. Place the unit in such a way that the mains plug
can be reached at any time. Ensure that the power supply to the unit corresponds
to that specified on the identification plate!
3.3.
Working with the unit
3.3.1.
1. Cycle switch (B) - pressing the button will open/close the outlet
2. Cooling switch (C) - pressing the button turns the cooling mode
on/off.
3. On/Off button (D) - pressing the button turns the control panel on/off.
Note: turning the display off does not cut off power to the unit.
4. Decrease value button (F) - in set-up mode pressing the button
decreases the value and longer holding the button decreases the
value in continuous mode.
5. Increase button (G) - in set-up mode pressing the button increases the
value and holding the button longer increases the value in continuous
mode.
In normal operation mode the button allows you to turn on/off the
backlight.
6. Settings button (H) - pressing the button allows you to display
temperature values and related parameters and to edit them.
3.3.2. Operation
Model
SBS-LCC-3000
Description of the buttons on the control panel
1. Open the cover (1) and fill with an appropriate amount of
liquid (the type of liquid, e.g. demineralized water, glycol,
Publicidad
