BAZOO EXCALIBUR Instrucciones De Uso página 8

bazoo Excalibur Laser Gaming Mouse
Installation
1. Connect the USB plus of the mouse to a USB on your PC
2. The PC recognises new hardware and loads standards drivers from the Windows CD
3. The basic functions of the mouse are now available
4. Place the driver CD in the drive of the PC
5. Double click on your CD drive in Explorer or on your desktop.
Double click to start the file "Setup.exe"
6. The installation routine starts automatically. Follow the instructions on the screen.
Upon completing installation you will be asked if you want to restart the PC or wait until later. Please note that all alterations
do not become effective until the PC is restarted.
Programming
Even without installing the attached driver you can already use the basic functions of the bazoo Excalibur Laser Gaming Mouse.
The side buttons then cover the standard functions of the operating system. To program the mouse you must first install the
driver software (see "Installation"). The mouse buttons are set up as follows (see Diagram 1):
1 – left mouse button
2 – right mouse button
3 – scroll wheel / third mouse button
4 – forward / fourth mouse button
5 – back / fifth mouse button
6 – increase resolution
7 – lower resolution
8