Publicidad
Idiomas disponibles
Idiomas disponibles
Specified Conditions Of Use
Only use the calibration unit to measure and calibrate
the soldering tip temperature under the conditions
stated here.
This device may only be used at room tempera-
ture and indoors. Protect against moisture and
direct sunlight.
Care and maintenance
To guarantee the measuring accuracy, we recom-
mend replacing the sensor after every 50 measure-
ments. This value is a guideline only.
When wiping any sensor connections that have been
contaminated with soldering flux, only use a soft cloth
impregnated with alcohol. Do not use any thinning
agents or petrol.
If the battery symbol displays „low", replace the batte-
ry with a battery of the same type. The specifications
can be found in the technical data. A low level of
battery can result in inaccurate readings.
Remove the battery from the device if it is not to be
used for a while.
Disposal
Electrical appliances, batteries and rechargeable
batteries must not be disposed of with household
waste. They must be collected separately and taken
to a recycling company for environmentally friendly
disposal. Ask the local authorities or your specialist
dealer about recycling centres and collection points.
Warranty
Claims by the buyer for physical defects are time-bar-
red after a period of one year from delivery to the
buyer. This does not apply to claims by the buyer for
indemnification in accordance with §§ 478, 479 BGB
(German Federal Law Gazette).
We shall only be liable for claims arising from a
warranty furnished by us if the quality or durability
warranty has been furnished by use in writing and
using the term „Warranty".
The warranty shall be void if damage is due to impro-
per use and if the device has been tampered with by
unauthorised persons.
For more information please visit
www.weller-tools.com.
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
Symbols
Caution!
Warning! Risk of burns
Read the operating instructions!
ESD-compatible design and ESD-
compatible workstation
Type-K Thermocouple
Thermocross
CE mark of conformity
British Conformity Mark
Disposal
Do not dispose of electric tools
together with household waste ma-
terial! In observance of European
Directive 2012/19/EU on waste
electrical and electronic equipment
and its implementation in accordan-
ce with national law, electric tools
that have reached the end of their
life must be collected separately
and returned to an environmentally
compatible recycling facility.
Disposal - UK
Do not dispose of electric tools
together with household waste
material! In observance of British
Directive 2013 No. 3113 on waste
electrical and electronic equipment
and its implementation in accordan-
ce with national law, electric tools
that have reached the end of their
life must be collected separately
and returned to an environmentally
compatible recycling facility.
19
Publicidad
