Turbo Function - Speedlink ThunderStrike Manual De Uso

Software installation:
D
1. Place the supplied driver CD-ROM in your CD-ROM drive.
GB
2. The installation program should start automatically.
3. If the installation program does not start automatically,
F
click on "Start/Run/Browse" and select your CD-ROM
drive.
E
4. Double-click on the "setup.exe" file.
I
5. Then follow the instructions on the screen.
6. When installation is complete, restart your PC.
Hardware installation:
1. Connect the USB cable of your gamepad to the USB port
of your PC. Windows may ask you to insert the Windows
98/2000/ME/XP CD to install the new hardware
component.
2. To configure the gamepad, click on Start/Settings/
Control panel/Game controllers. Note that this control
panel is called "Gaming options" under Windows Me.
3. Select the device driver.
4. Click on Properties. This menu enables you to test and
calibrate all functions, including Force Vibration.

Turbo function

The Turbo function allows you to set continuous fire to a fire
button. Proceed as follows:
1. Press the Turbo button once and then a firing button. If
you now hold down the firing button, you can perform
continuous firing.
2. To reset the Turbo function, press the Clear button and
then the firing button that was assigned continuous fire.
8