IKEA SPRIDD Manual De Instrucciones página 10

ENGLISH
How to use
― Wash, rinse and dry the travel mug before using it for the first time.
Remove the lid by turning it to the right (fig. 1) and remove the filter
(fig. 2). Fill with content and put on the lid. To drink from the travel
mug, grab the circle on the top of the lid and pull it gently straight up
until you hear a click (fig. 3), for closed position pull it downwards (fig.
4).
― To change the inside paper, turn the bottom of the mug to the left (fig.
5). Remove the paper (fig. 6) and use it as a template (fig. 7) to cut
your own paper to decorate your mug (fig.8). Insert in the paper (fig.9)
and close by turning the bottom to the right (fig.10).
Cleaning
Empty it after use and wash it by hand in water with an addition of
bicarbonate of soda or dishwashing detergent. The lid of the mug is divided
into three parts which can be separated for careful cleaning. Careful
cleaning is especially important if the mug has contained coffee or tea with
milk, as this poses a potential risk of formation of bacteria. Important! The
lid must be in closed position to be taken apart (fig. 4). To separate the lid;
turn the lid upside down and grab the circle with an arrow marked. Turn it
gently to the right or the left (fig. 11) until you hear a click. The lid can now
be separated.
Good to know
The travel mug keeps drinks hot or cold, but does not serve the same
purpose as a vacuum flask. If it is important that the drink remains hot or
cold for a long period of time, you should use a vacuum flask.
10