LEITZ 52790019 Manual Del Usuario página 7

Set-up and usage
②
● Unpack the product and check the contents of the package.
Allow the ball Ⓐ to reach room temperature.
●
③
Put the ball Ⓐ into the sleeve Ⓑ. Make sure the valve on the ball Ⓐ sticks out of the
●
sleeve Ⓑ.
Put the hand pump Ⓒ into the valve.
●
④
Inflate the ball Ⓐ to 80% and insert the plug Ⓓ into the valve.
●
● Make sure the valve remains accessible.
Allow the ball Ⓐ to rest for 2 hours.
●
⑤
● Remove the plug Ⓓ from the valve and inflate the ball Ⓐ to 100%.
Insert the plug Ⓓ into the valve. Close the zip and make sure there is no tension on it.
●
⑥
● Sit in an upright position and avoid instability.
● Do not exceed the maximum loading capacity.
Technical specifications
Product codes
Dimensions
Circumference
Weight
Materials
Available colours
Maximum loading capacity
Ideal user length
Maintenance
To clean the Active Sitting Ball:
1. Use the remover Ⓔ to deflate the ball Ⓐ and remove it from the sleeve Ⓑ.
Hand wash the sleeve Ⓑ at 30°C with similar colours. Wash separately for the first time.
2.
Do not use wipes or solvents as these could damage the product.
Allow the sleeve Ⓑ to dry completely. Do not tumble dry.
3.
If needed, remove lint from the sleeve Ⓑ with a lint brush.
4.
Warranty
1. Leitz gives you a 2-year guarantee for defects in materials and manufacturing.
2. Leitz guarantees that when faults arise due to defects in manufacturing and materials
during the guarantee period, it will repair or, if necessary, replace the product, free of
charge. A guarantee for normal wear and tear is hereby expressly excluded.
3. The Leitz guarantee shall lapse in the following cases:
a.
b.
c.
d.
4. You can find the warranty terms and the contact details of your local customer service on
the Leitz website.
7
52790019, 52790061, 52790089
ø65 cm
204 cm
1000g (ball), 560g (sleeve)
PVC (ball), Polyester (sleeve), plastic-free packaging
Warm Yellow, Calm Blue and Velvet Grey
100 kg
155-180 cm
If the product has not been set-up and used in accordance with these
instructions;
If the product has been altered or repaired by someone other than Leitz;
If a fault arises due to external causes;
If the product is used for different uses than intended in this document.