Preparation; Operating Instructions - skilsaw SPTH15 Instrucciones De Funcionamiento Y Seguridad

Remove the battery pack from the package and examine it carefully. Do not discard the carton
or any packaging material until all parts have been examined.
If any part of the tool is missing or damaged, do not attach the battery pack or use the tool until
the part has been repaired or replaced. Failure to heed this warning could result in serious
injury.
To operate this battery pack, carefully read this manual and all labels affixed to the battery pack
before using it. Keep this manual available for future reference.
WARNING
product damage due to a short circuit,
never immerse your charger or battery
pack in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc, can
cause a short circuit.
KNOW YOUR BATTERY PACK
Before attempting to use the battery pack,
familiarize yourself with all of its operating
features and safety requirements.
WARNING
create accessories not recommended for
use with this battery pack. Any such
alteration or modification is misuse and could
result in a hazardous condition leading to
possibly serious personal injury.
POWER INDICATOR (FIG. 2)
This lithium-ion battery pack is equipped with
a power indicator that displays the battery
pack's charge status. Press the power-
Battery Pack Charge Status
≥75%
50%~75%
25%~50%
10%~25%
0%~10%
8

Operating Instructions

To reduce the risk of
fire, personal injury, and
Do not attempt to modify
the battery pack

Preparation

indicator button to display the LED lights in the
power indicator. The LED lights will stay lit for
approximately 3 seconds. It is recommended
that the battery pack be brought up to full
charge before starting a big job or using it for
an extended period of time.
NOTICE: The power indicator can be used
whether the battery is attached or removed
from tool.
Press the power indicator to display the
battery pack charge status.
Fig. 2
or
Power Indicator
4 green LEDs on for 3seconds
3 green LEDs on for 3seconds
2 green LEDs on for 3seconds
1 green LEDs on for 3seconds
4 red LEDs flash for 5seconds