Marathon Paris Manual De Instrucciones página 19

Setting the time and
setting an alarm
Radio controlled clock
After the weather station has powered on and
completed syncing temperature and humidity from
the outdoor sensor, The DCF signal, radio controlled
icon will automatically flash on the LCD, indicating
the clock synchronizing the current time and date.
Icon turns on
Indicates signal has been received
Icon flashes
Indicates it is receiving DCF signal
Icon disappears
Indicates signal has failed
NOTE:
The clock will automatically synchronize with the
•
radio wave signal at 3.00 a.m. every day to maintain
accurate timing.
If reception fails, scanning will stop and the
•
disappear from the LCD
The clock can be set to synchronize manually by
•
holding the button for 3 seconds.
(Synchronization can take several minutes.)
You can stop the DCF synchronization by holding
•
the button for 3 seconds.
If the weather station is in daylight savings mode a
•
will show on the LCD.
EN
will