Manual Time Setting:
To enter the Clock/Calendar setting mode, press
•
and hold the
button for 3 seconds until
MODE/SET
the digits flash.
Press ▼or ▲ button to adjust the desired value
•
and press the
MODE/SET
on to the next setting.
Hold down the ▼ or ▲ button to speed up setting.
•
Press the
button to confirm settings and
•
MODE/SET
exit from time setting mode or the time setting
mode will automatically exit after 15 seconds if no
button is pressed.
The setting sequence is as follow:
1 press = 12/24 Hour
2 presses = Time Zone
3 presses = Hour
4 presses = Minute
5 presses = Second
6 presses = Language
7 presses = Year
8 presses = Month
9 presses = Day
NOTE:
The days of the week can be displayed in 8
•
different languages: German (GE), French (FR),
Spanish (ES), Italian (IT), Dutch (NE), Danish (DA),
Russian (RU), and English (EN).
The language and their select abbreviations for
•
each day of the week are shown in a table at the
back of this manual.
The Second setting is adjusted to zero only.
•
Time Zone function: If your area can receive an RC-
•
DCF frequency signal, the time zone function
should be set to 0. The Time Zone function is used
in areas where a DCF frequency signal can be
received but the time zone is different from the
German Time.
button to confirm and move
Daily Alarm Function:
Press
button to select to view the Time
•
MODE/SET
(Time & Day of Week) or Alarm Time ( "AL" shown
on the LCD)
When viewing the alarm time, hold the
•
button for 3 seconds to enter the alarm setting
mode. Press the ▼ or ▲button to adjust alarm
time. Press the
MODE/SET
setting.
Press the
button to activate or deactivate the
•
alarm. If the alarm is activated, the
appear on the screen.
Press the
button to silence the alarm and
•
SNOOZE
enter snooze mode, the alarm will sound again in 5
minutes. During snooze mode the
on the LCD.
Press any button other than the
•
to stop the alarm. Otherwise, the alarm sound will
continue for 2 minutes before stopping.
NOTE:
The snooze function can be repeated up to 7 times.
Additional Information
Dimmer
Press the
button to adjust the LED brightness
DIMMER
(off-med-high), when powered by the adaptor,
Low battery indication:
The low battery icon
MODE/SET
button to confirm the
icon will
icon will flash
button,
SNOOZE
will display beside the
EN