Steinberg Systems SBS-EH-500/3 Manual De Instrucciones página 41

nn) The A-weighted sound pressure level at the operator's station is less than 78
dB.
oo) The ambient temperature in the operating area should be between 0-40°C.
pp) Always make sure that the load is properly and securely attached to the hook.
qq) Always keep a safe distance from the load and chain.
rr) Do not use limit switches as routine stop items. They are emergency devices
only.
ss) Do not drag loads on the ground.
tt) Always keep a safe distance from the load and chain.
uu) Do not use the machine with a twisted, tangled, damaged or worn chain.
vv) Do not lift the load until it is in a central position under the machine.
ww) It is forbidden to extend or repair the chain. A damaged chain must be replaced
with a new one at the manufacturer's service facility.
xx) Protect the machine and chain from welding spatter or other harmful
contaminants.
yy) Do not work with the machine if the chain cannot form a straight line from the
machine body to the hook attached to the load.
zz) Do not use the chain as a sling and do not wrap the chain around the load.
aaa) Do not put any strain on the tip of the hook or the hook latch.
bbb) Do not operate the chain beyond its movement limits.
ccc) The load must be balanced so that it does not tilt during transport and does
not fall out of its mount.
ddd) Regularly check that the limit switches of the device are working properly.
eee) Before each lifting operation, check the operation of the brake by applying
tension to the chain.
fff) The machine must be inspected regularly and damaged or worn parts must be
replaced by an authorized service center.
CAUTION! Although the product has been designed to be safe and has
adequate safeguards and despite the additional safety features provided
to the user, there is still a slight risk of accident or injury when handling
the product. Caution and common sense are advised when using the
product.
3. Instructions for use
The machine is intended solely for the vertical lifting and lowering of loose loads
in the workplace. The lifting weight of the load must not exceed the given
permissible load capacity. The machine can be used in factories, farms,
construction sites, for the assembly of equipment and for loading and unloading
of goods. Using the machine in corrosive environments and environments with
an explosive atmosphere is forbidden.