Sauder Beginnings Serie Instrucciones De Montaje página 14

Step 10
Carefully stand the unit upright.
å
To insert the drawer into the unit, line up the grooves on the DRAWER
å
SIDES (D217) with the SLIDES in the unit. Slide the drawer into the unit
until it is about 3" or 4" away from the back of the unit.
Using your hammer, gently tap two DRAWER PINS (from Step 2) into
å
the holes in the DRAWER SIDES (D217).
NOTE: The DRAWER PINS are used as a locking system for the
å
drawer. When the DRAWER PINS are in place, you will not be able to
remove the drawer from the unit.
DRAWER PIN
Page 14
D217
415544
D217
www.sauder.com/services