Bauhn H3 Manual Del Usuario página 9

connect to the projector. After a few seconds the Android device's screen will be
displayed by the projector.
iOS Display
2.
iOS Display via WiFi:
1. Open the iOS device. Make sure WiFi is turned on.
2. Select "Projector-XXXXXX" to connect to this projector. If asked, enter
password "12345678" and press "Join".
3. Open the iOS device's browser and enter "192.168.49.1",
4 Select "WiFi AP", and then select "Scan" to auto search the WiFi router SSID and
then type password to connect projector to WiFi router.
5. If the WiFi router SSID is hidden, please select "Add Network" to manually
input SSID and password to connect.
6. Connect the iOS mobile device to your home WiFi network.
7. In the iOS mobile device, pull down the control panel, select "Screen
Mirroring" and select "Projector-XXXXXX", the projector will display the iOS
screen.
9