5
INSTALLING SIDE GASKET/MAGNETIC SEAL AND HANDLE SET
• In this step, you'll need following parts: [5] x1, [6] x1,
[7] x1, [8] x1, [12] x1, [18] x1
5a
5a. Install Longer Side Gasket [5] onto left edge of Door Panel-L [10]. Install Shorter Side Gasket [6]
onto right edge of Fixed Panel A [9].
5b. Install Longer Magnetic Seal [7] onto right edge of Door Panel-L [10]. Install Shorter Magnetic Seal [8]
onto left edge of Fixed Panel B [11].
5c. Unscrew upper portion of Handle Set [12 Longer End] and install into upper hole of Door Panel-L [10].
5d. Unscrew lower portion of Handle Set [12 Shorter End] and install into lower hole of Door Panel-L [10].
5e. Tighten both upper and lower portions of Handle Set [12] using supplied 2.5 mm Allen Key [18] to secure
Handle Set [12] to Door Panel-L [10].
[5]
5b
[1]
[8]
5c
5a
[9]
[1]
[10]
[6]
5b
[11]
[10]
[7]
5c
[10]
[12]
5d
[10]
[12]
5e
[18]
[10]