waterpowered SoWash Sonic SWSO10001 Manual De Uso página 5

• In any case where the toothbrush presents structural damage such as protruding parts
or sharp edges from an accidental fall making it dangerous, immediately contact an autho-
rized customer assistance and follow their indications.
EN
• Do not wet the electrical connections with water or any other liquid (plug).
• It is necessary to follow the maintenance as described in the manual.
• Maintenance must be done following the manual instructions.
• If tampering with any electrical parts, assure that they are not under electric voltage.
• Handle wires and plugs with dry hands.
HANDLING
It is advised to keep in mind some aspects before proceeding with the handling and use of
the toothbrush. In particular the following:
• The base of the charger must be placed in a position where it will not be in contact with
vapor, water or any other liquids. Do not place it near the tub or on the wash basin.
• Place it on an open space.
• The room temperature for the storage of the toothbrush must be between 0°C and +40°C
• The toothbrush should be used at a room temperature between 0°C and +40°C
• Humidity conditions should be between 45% and 95%.
• The toothbrush can only be used indoors in order to respect the indicated factors above.
• Do not place the base of the charger near a television, monitor, computer, cell phones,
magnetic bands /discs, appliances/medical devices etc.
• People with a pacemaker must not use this device unless authorized by a doctor.
POSITIONING OF THE BASE
The socket that you use for the plug of the base for the toothbrush should follow all regu-
lations including an automatic reset switch and a ground line.
If the charge, use and / or maintenance of the toothbrush are not in compliance with these
regulations there may be an abnormal malfunction while in use, and create safety hazards.
Any inappropriate use and maintenance will invalidate the terms of the warranty.
Before using the toothbrush in any way, completely remove any eventual protection from
dust, humidity or any other packaging material.
• Use the product only with original base charger.
• Keep the product, particularly the wire, away from heat sources.
• If the wire is damaged, do not try to repair it, it must be substituted and you must su-
spend the use of the product.
Verify that all the parts of the toothbrush and its accessories do not present physical dama-
ge as a result of an impact, tears or abrasions.
Check in particular :
• That there are no dents , indicating damage during delivery and its normal use.
• Verify that water has not entered , humidity or the formation of condensation . In any of
these situations you must wait 30 minutes before following any operations.
The illumination system (natural or / artificial ) in the location of the base and use of the
toothbrush should secure the following minimum value of illumination: 200 lux.
3