Makita PDC01 Manual De Instrucciones página 10

NOTICE:
When installing adapters to the tool or
machine, be sure to install the adapter equipped
with 2 cords to the location shown in the figure.
If you install the adapters incorrectly, the adapter
equipped with 2 cords cannot be inserted all the
way. In this case, do not insert the adapter forci-
bly. Otherwise, the tool or machine may be damaged.
► 1. Adapter with 2 cords
► 1. Adapter with 2 cords
NOTE: The direction of the cord of the adapter can be
changed in the range of approximately 180 degrees.
5. Press the power button to turn the power on. To turn
the power off, press the power button for a few seconds.
1
► 1. Power button
Using the cord holders
CAUTION:
box to the cord holders. Do not attach the cord
of the adapters to the cord holders. Attaching the
cord of the adapters may invite accident and cause
an injury.
You can attach the cord of the battery box to the cord
holders as shown in the figure.
1
1
► 1. Cord holder
You can also attach the cord using only the cord holder
of the waist belt as shown in the figure.
► 1. Cord holder
10 ENGLISH
1
Attach only the cord of the battery
1