Publicidad
DIG-M-2
CABLEADO Y CONEXIONES
NOTA
MIW-DIG-M-2-ES-000 - 26 / 10 / 2021
PUЕRTA DE ENLACE A INTERNET
PARA CARRIL DIN
►
EN 55011:2009 Industrial, scientific and medical equipment - Radio-frequency
disturbance characteristics - Limits and methods of measurement Amendment
A1:2010 to EN 55011
►
EN 55024:2010 Information technology equipment - Immunity characteristics
- Limits and methods of measurement
►
EN 50561-1:2013 Power line communication apparatus used in low-voltage
installations – Radio disturbance characteristics – Limits and methods of
measurement – Part 1: Apparatus for in-home use
■
LVD directive 2014/35/EU:
►
EN 60950-1:2006 Information technology equipment - Safety - Part 1: General
requirements Amendments AC:2011, A11:2009, A12:2011, A1:2010 and
A2:2013 to EN 60950-1
►
EN 62311:2008 Assessment of electronic and electrical equipment related to
human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
■
Radio equipment directive 2014/53/EU:
►
EN 300 328 V2.1.1 Wideband transmission systems; Data transmission
equipment operating in the 2,4 GHz ISM band and using wide band modulation
techniques; Harmonised Standard covering the essential requirements of
article 3.2 of Directive 2014/53/EU
■
ETSI EN 301 489-1 V2.1.1 (2017-02) Electromagnetic Compatibility (EMC)
standard for radio equipment and services; Part 1: Common technical
requirements; Harmonised Standard covering the essential requirements of
article 3.1(b) of Directive 2014/53/EU and the essential requirements of article
6 of Directive 2014/30/EU
■
ETSI EN 301 489-17 V3.1.1 (2017-02) Electromagnetic Compatibility (EMC)
standard for radio equipment and services; Part 17: Specific conditions for
Broadband Data Transmission Systems; Harmonised Standard covering the
essential requirements of article 3.1(b) of Directive 2014/53/EU
■
WEEE 2012/19/EC
■
RoHs Directive 2011/65/EC:
►
EN IEC 63000:2018 Technical documentation for the assessment of electrical
and electronic products with respect to the restriction of hazardous substances
Pin 1
24 VDC
Pin 2
Pin 3
A
Pin 4
Pin 5
/B
Pin 6
Pin 7
GND
Pin 8
GND
/B
A
24 VDC
¡No conecte alimentación de 24 VDC a través de ambas tomas RJ45
simultáneamente!
www.sentera.eu
volver al índice
Conexión RJ45 (Power over Modbus)
8
8 mm
7
6
8 mm
5
4
8 mm
3
2
8 mm
1
Tensión de alimentación
Modbus RTU (RS485), señal A
Modbus RTU (RS485), señal / B
Masa, tensión de alimentación
8
7
6
6
5
5
4
4
4
3
3
3
2
1
5 - 10
Publicidad
