CLEANING AND MAINTENANCE
• Unplug the mains from the socket before cleaning the grill.
• The appliance, the power cable and the mains plug must not be immersed in water or any
other liquids.
• Clean the appliance after each use and remove all food residues.
• For cleaning purposes, remove the grill plates from the appliance after it has cooled down.
• Remove the grill plates to avoid damaging their surface while cleaning.
• The oil recipient can be cleaned in the dishwasher. Alternatively, it can be cleaned manually
with a small amount of detergent. After washing it manually, rinse thoroughly and wipe with
a paper towel.
• Do not clean any parts of the grill with metal wash pads or brushes. Use only nylon or
otherwise non-metal cleaning pads.
• Clean the outer surfaces using a soft, damp cloth and mildly soapy water.
• Clean all parts and allow them to dry properly before putting the contact grill away.
STORAGE
• Store the contact grill in a dry place.
INSTRUCTIONS
Before use
First-time use of the grill will cause a small amount of carbonization. This is a perfectly normal
phenomenon.
Place the appliance on a clean, flat surface. It can be positioned in three different ways.
Closed position
With the upper housing placed on the base, this position should be used when the grill is
switched off. It is also the position used when starting up the grill, and to preheat it.
EN
9