Trevi MPV1505XB Manual Del Usuario página 4

ENGLISH
DESCRIPTIONS OF CONTROLS
9.
10.
OPERATION CHARGING THE BATTERY
The headset function with a rechargeable battery.
To recharge:
- Connect the USB plug of the USB-microUSB cable provided to a device equipped with USB port (computer, tablet
...) or a 5VDC power supply with USB connection (not supplied).
- Connect the microUSB plug to the headset into the connector (11); during the charge operation the LED(5) will
light red.
- Charging is completed when the LED charging indicator (5) will go off.
SWITCHING ON AND OFF
To turn on the headset move the power switch to ON position, the LED (9) will become blue.
To turn off the headphones move the power switch to OFF position, the LED (9) will be switched off.
ADJUSTING THE VOLUME
You can adjust the sound volume with the functions control(8):
1. Turn the control dial function (8) and hold to VOL + position to increase the volume.
2. Turn the control dial function (8) and hold to VOL- position to decrease the volume.
FM RADIO
To listen your favorite radio stations:
1. Turn on the headset, and press and hold down the control function (8) to be heard in the headset or speaker the
radio.
2. While listening FM radio, press once the functions control dial(8) to activate the SCAN RADIO, headphones auto-
matically scans the radio stations and saved in memory (up to a maximum of 30 radio stations).
To change from one radio station to another move the dial(8) to + or - position.
2.
11.
1. External speaker
2. Internal speaker
3. EQ button
4. On/Off switch
5. Recharge LED
6. Micro SD card IN
7. Headphone/speaker switch
8. Functions control
9. Power on LED
10. Line IN
11. Micro Usb connector
PAG.4
MPV1505XB