Publicidad
Idiomas disponibles
Idiomas disponibles
As drop arrester for this product, use only a combination of the Hilti retaining strap and the Hilti tool tether
#2261970.
▶ Secure the retaining strap to the installation openings for accessories. Check that it holds securely.
▶ Secure one carabiner of the tool tether to the retaining strap and secure the second carabiner to a
load-bearing structure. Check that both carabiners hold securely.
Comply with the operating instructions of the Hilti retaining strap and those of the Hilti tool tether.
6
Operation
Observe the safety instructions and warnings in this documentation and on the product.
6.1
Operation
8
1. Install the auxiliary handle. → page 8
2. Fit the depth gauge. → page 8
3. Fit the dust removal module. → page 9
Install the dust collection module only for overhead work.
4. Install the dust collection module for overhead work. → page 9
5. Adjust the depth gauge.
6. Set the function selector switch to the desired function.
Options
Drilling
Hammer drilling
Chisel positioning
Chiseling
7. Change the accessory tool. → page 9
8. Hold the rotary hammer drill in position.
9. Press the control switch.
Speed of rotation can be regulated steplessly by means of the control switch.
10. Release the control switch to cease operation.
6.2
Setting direction of rotation
1. Operate the forward/reverse switch.
2. Select the desired position.
Options
Forward rotation
Lock
Reverse rotation
▶ The switch engages in the desired position.
7
Care and maintenance
WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance tasks!
Care of the product
•
Carefully remove stubborn dirt.
10
English
9
Rotary hammer drill rotates clockwise.
Rotary hammer drill is locked.
Rotary hammer drill rotates counter-clockwise.
2351801
*2351801*
Publicidad
