Senix B25X2 Manual De Instrucciones página 16

Press the unlock button on the battery pack and slide battery pack from the tool.
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may become hot. A hot
battery pack may be placed directly onto the charger port but charging
will not begin until the battery temperature cools to within acceptable
temperature range. When a hot battery pack is placed on the charger,
the charger may indicate the pack is not ready to charge. Please refer to
charger operator's manual. When the battery pack cools the charger will
automatically begin charging.
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the charger port but
charging will not begin until the battery temperature warms to within
acceptable temperature range. When a cold battery pack is placed on
the charger, the charger may indicate the pack is not ready to charge.
Please refer to charger operator's manual. When the battery pack warms
to approximately room temperature the charger will automatically begin
charging.
NOTE:
Longest life and best performance can be obtained if the battery pack is
charged when the air temperature is between 64°F(18°C) and 75°F(24°C).
DO NOT charge the battery pack in an air temperature below 32°F(0°C),
or above 122°F(50°C). This is important and will prevent serious damage
to the battery pack.
EN - 16 WWW.SENIXTOOLS.COM