Descargar Imprimir esta página

BatteryLabs MegaUMPF 2 Manual página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
Manual
BatteryLabs MegaUMPF2
1. Product information
The MegaUMPF2 battery series is specially designed for marine applications and use in harsh environments.
2. Specifications
Voltage range (type 12V LiFePO4): 2.5V - 14.6V
Voltage range (type 24V Li-ion NMC): 21.0V - 29.4V
Voltage range (type 36V Li-ion NMC): 30.0V - 42.0V
Voltage range (type 48V Li-ion NMC): 39.0V - 45.6V
Capacity: indicated on the bottom of the product.
Discharge current via battery terminals: 50A continuously (100A peak, 3s)
Discharge current via XLR-M 3P connector: 10A (1 = positive, 2 = negative)
Charging current via battery terminals: 20A
Charging current via XLR-M 3P connector: 10A
Discharge temperature range: -20° C + 50°C
Charge temperature range: 0° + 50°C
Bluetooth: BLE 4.2, BatteryLabs app available in Appstore and Google play store.
3. Descriptionof the elements
4. Usage
Only use the battery for applications for which it is intended. In case of any doubt contact the specialists of
BatteryLabs.
The battery must be charged after usage.
Charge the battery at least once every 2 months, even if it is not being used.
When the battery is not used for a longer period of time, it is best to store it with 50% capacity at room temperature.
Do not drop the battery and avoid serious impact.
The battery is waterproof (IP67), which means that the battery can be damaged if it is under water for more than 30
minutes.
Only use a suitable BatteryLabs charger or a compatible charger, recommended by BatteryLabs or an authorized
BatteryLabs dealer. Using the wrong charger will damage the battery.
Do not use the battery in series or parallel circuits unless connected by an authorized BatteryLabs dealer. Make sure you
have been informed about possible complications.
In the event of problems or oddities, you should contact the BatteryLabs specialists.
5. Warranty
The product has a 2 year warranty. In addition the following conditions must be observed:
Warranty is given based on the serial number (Serial No.) of the product, the right to warranty expires upon removal or
modification.
Failure to comply with point 4. (Usage) is at the expense of the warranty.
Warranty does not cover damage from falling/vibration/impacts, water damage improper act or not following the
instructions correctly.
There are terms and conditions applied on this product, available at www.batterylabs.nl/p/tos
Lithium Battery
®

Publicidad

loading