Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
instruction manual
operAtion -
1. Make sure that the On/Off switch of the
manicure/pedicure appliance is set to 0 (Off).
2. Fit an attachment to the appliance (Figure 3).
The metal attachments are used to buff and file
your nails, and to remove horny skin. The finer
attachments are used to finish your nails. The
felt cone is used to polish your nails.
3. Switch on the appliance by setting the On/Off
switch to I or II.
4. Switch off the appliance once you have finished
by setting the On/Off switch to 0 (Off).
5. Return the appliance to the charging stand.
cleAning And MAintenAnce
1. Remove the attachment fitted to the manicure/pedicure appliance. Clean the attachment with a clean dry
cloth, and return it to the storage case.
2. Clean the appliance with a clean dry cloth, and return it to the storage case.
•
Verify that the appliance is not connected to the power supply before you start to clean it.
•
Never use corrosive or scouring cleaning products or sharp objects (such as a knife or a hard brush)
to clean the appliance.
•
Never immerse the base in water or in other liquids.
•
The appliance and its parts are not dishwasher-proof.
tHe enVironMent
•
Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
•
When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the
symbols on the product, the user's instructions or the packaging.
•
The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
•
Contact your municipality for the address of the appropriate collection point in your neighbourhood.
guArAntee terMs
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried out
during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty appliance
(in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:
a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety
17
Publicidad
Tabla de contenido
