9.2
Daily maintenance
EN
9.3
Weekly maintenance
10
14
Daily maintenance
Check whether sufficient chemicals are available
in section
Cleaning preparations
page 13)).
•
The wash basin must be cleaned several times during use as well as
at the end of each working day or if dirty.
•
Clean and dry the lens of the sensor. For this purpose, use a soft
cloth to avoid damaging the sensor.
•
Clean brushes of the sole cleaner.
SANICARE-WM / EWG-EZR
•
Clean dispenser components with non-scratch cleaning agent
the figures in section
Cleaning preparations
preparations" on page 13) and section
"Daily maintenance" on page 14)).
•
Check the drain of the wash basin. If necessary, clean the syphon on
the underside
•
Get rid of dirt.
Faults
In case of faults, the user should contact the technical service
(see also the figure
r
(refer to "Cleaning preparations" on
(refer to "Cleaning
Daily maintenance
(see
t
(refer to
2021-08-31