Setting Engine Speed - Honda GX100 Manual Del Propietário

3. Turn the engine switch to the ON position.
ON
4. Pull the starter grip lightly until you feel resistance, then pull
briskly in the direction of the arrow as shown below. Return the
starter grip gently.
Do not allow the starter grip to snap back against the engine.
Return it gently to prevent damage to the starter.
5. If the choke lever was moved to the CLOSED position to start
the engine, gradually move it to the OPEN position as the
engine warms up.
OPEN
ENGINE SWITCH
(EQUIPMENT SIDE)
Direction to pull
STARTER GRIP
CHOKE LEVER
OPEN

SETTING ENGINE SPEED

Position the throttle lever for the desired engine speed.
Some engine applications use a remote-mounted throttle control
rather than the engine-mounted throttle lever shown here.
ON
For engine speed recommendations, refer to the instructions
provided with the equipment powered by this engine.
MIN.
MAX.
ENGLISH
MIN.
MAX.
THROTTLE LEVER
5