Chauvin Arnoux PA30W Manual De Instrucciones página 13

3.4. MECHANICAL CHARACTERISTICS
Dimensions (L x D x H)
Lead
Weight
Inrush protection
Drop
3.5. COMPLIANCE WITH INTERNATIONAL STANDARDS
The instrument is compliant with IEC/EN 61010-1 or BS EN 61010-1 and IEC/EN 61010-031 or BS EN 61010-031 for a voltage
of 600V in overvoltage category IV with degree of pollution 2.
The instruments are compliant with FCC Rules part 1 under number 83TD07571.
3.6. ELECTROMAGNETIC COMPATIBILITY (CEM)
The instrument is compliant with standard IEC/EN 61326-1 or BS EN 61326-1.
The instrument contains no parts that can be replaced by personnel who have not been specially trained and accredited.
Any unauthorized repair or replacement of a part by an "equivalent" may gravely impair safety.
4.1. CLEANING
Disconnect the unit completely.
Use a soft cloth, dampened with soapy water. Rinse with a damp cloth and dry rapidly with a dry cloth or forced air. Do not use
alcohol, solvents, or hydrocarbons.
Except as otherwise stated, our warranty is valid for 24 months starting from the date on which the equipment was sold. The
extract from our General Conditions of Sale is available on our website.
www.group.chauvin-arnoux.com/en/general-terms-of-sale
The warranty does not apply in the following cases :
„ Inappropriate use of the equipment or use with incompatible equipment;
„ Modifications made to the equipment without the explicit permission of the manufacturer's technical staff;
„ Work done on the device by a person not approved by the manufacturer;
„ Adaptation to a particular application not anticipated in the definition of the equipment or not indicated in the user's manual;
„ Damage caused by shocks, falls, or floods.
160 x 80 x 57 mm
1.80m, terminated by a jack connector.
approximately 530g.
IP 40 per IEC 60529.
IK 04 per IEC 62262.
1 meter.
4. MAINTENANCE
5. WARRANTY
13