Gude BSB 18-0 BL Traducción Del Manual Original página 20

ENGLISH
Technical Data
Cordless percussion drill/driver
Art. No
Battery voltage
No-load speed
Rate of percussion under load
Torque max.
Drilling capacity max.
Drill chuck range
Weightwithout battery/Charging equipment
Noise details
Measured according to EN 62841; Uncertainty K = 5 dB (A)
Sound pressure level L
pA
Sound power level L
WA
Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum) determined according to EN 62841,
Uncertainty K = 1,5 m/s
2
Drilling into metal: Vibration emission value a
Impact drilling into concrete: Vibration emission value a
Wear hearing protection!
The values stated are emission values and as such do not necessarily constitute values which are safe for the work-
place. Although there is a correlation between emission levels and environmental impact levels, whether further
precautions are necessary cannot be derived from this. Factors in uencing the actually present environmental
impact level in the workplace include the characteristics of the work area and other noise sources, i.e. the number of
machines and other neighbouring work processes. The permitted workplace values can likewise vary from country
to country. This information is intended to assist the user in estimating hazards and risks.
WARNING
The noise emission level given in this information sheet has been measured in accordance with a standardized test
given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure.
The declared noise emission level represents the main applications of the tool. However if the tool is used for diffe-
rent applications, with different accessories or poorly maintained, noise emission may differ. This may significantly
increase the exposure level over the total working period.
An estimation of the level of exposure to noise should also take into account the times when the tool is switched off
or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise such as: maintain the tool and
the accessories and organization of work patterns.
Exposure to noise can cause hearing loss.
16
1st gear
2nd gear
1st gear
2nd gear
Steel plate
Wood
brick and tile
h,D
h,ID
BSB 18-0 BL
58445
18 V
0 - 500 min
-1
0 - 2000 min
-1
0-7500 min
-1
0-30000 min
-1
55 Nm
13 mm
35 mm
13 mm
2 - 13 mm
1,22 kg
81,3 dB(A)
86,3 dB(A)
1,966 m/s²
3,054 m/s²