Publicidad
Step 13:
Connect each upper safety pole and lower safety
pole together by the pin and make sure the pin
locked.
Step 15:
Insert the curved enclosure poles into the two
welded tubes of the leg tube one by one, as
shown in the picture. Tighten the safety poles
with attached screws at the bottom welded
tubes. (Please use the hexagon L Spanner.)
Step 17:
Put safety net onto jumping mat. Stand on the
jumping mat and then pick up the safety net's
fiberglass poles and insert them to the black top
hats one by one.
Manual – Trampoline – Senz Sports – J5000 Series – SZTR
Step 14:
Cover the entire pole with sleeve.
Step 16:
Insert fiberglass poles into the top pathway of
safety net one by one. Join the ends of two
fiberglass poles together by silver connector. (If
there is a shorter pole, then assemble it at last.)
Step 18:
Find plastic hooks at the bottom of the safety net
and hang them into the back of elastic mesh.
9
Publicidad
