Descargar Imprimir esta página

nedis PETH112DWT Manual De Uso página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
manipulating in one minute.
Note:
In order to avoid spreading germs,
please use a new disposable probe
cover for each measurement.
Check to ensure probe cover is fitted
on firmly before use (please see the
diagrams right). If the probe cover is
broken or discarded, apply a new one
immediately.
Cleaning and storage:
1. Store thermometer and the disposable probe cover in a dry location free
from dust and contamination and away from direct sunlight. The ambient
temperature at the storage location should remain fairly constant and
within the range of -10 °C to 55 °C.
2. Use an alcohol swab or cotton swab moistened with alcohol (70%) to clean
the thermometer casing and the measuring probe. Ensure that no liquid
enters the interior of the thermometer.
3. Never use abrasive cleaning agents, thinners
or gasoline for cleaning and never immerse the
instrument in water or other cleaning liquids. Take
care not to scratch the surface of the probe membrane
or display.
Replacing the batteries:
1. When voltage of the batteries are low, the LCD will display "
please replace two new batteries in the unit. The thermometer cannot work
accurately under the condition of low voltage.
2. The thermometer is supplied with two 1.5 V AAA alkalescency batteries.
Insert new batteries when the low voltage symbol appears on the LCD.
3. Screw off the bolt and remove the battery cover and take out the old
batteries.
4. Place two new batteries according to the + and –.
5. Please take out the batteries to avoid battery leaking if unit not used for
over six months.
Incorrect
3
ENGLISH
Correct
" symbol,

Publicidad

loading