Publicidad
Muting the Microphone
Tap the tap-to-mute sensor to mute/unmute the microphone.
The LED ring will toggle to indicate the change in mute status.
HyperX NGENUITY Software
To customize lighting, download the
HyperX NGENUITY software at :
hyperxgaming.com/ngenuity
Turning Microphone Monitoring On/Off
To turn microphone monitoring on/o , press and hold the
multifunction button and tap the tap-to-mute sensor
Installing the Mount Adapter
1. Remove both the thumb screw and nut from the microphone stand.
2. Remove the microphone stand from the microphone.
3. Align the mount adapter with the microphone mount holes and
secure the adapter with the thumb screw and nut.
Questions or Setup Issues?
Contact the HyperX support team or see the user manual at
hyperxgaming.com/support/microphones
Publicidad
