Descargar Imprimir esta página

SCHULLER 748261 Instrucciones De Montaje página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

U
18.
nplug the unit and wait till it cools before cleaning.
Don't
19.
use this unit in place where causticity or volatile air exists, i.e.
dust, steam, gas, etc.
Don't
20.
use this unit as a cloth drier or towel drier.
Don't
21.
use this unit as a sauna heater.
Don't
22.
use this unit in place of animal propagating and raising.
Don't
23.
immerse this unit into water for cleaning.
T
24.
he unit should be plugged in a socket, which is easily visible and
reachable.
T
25.
wo Dark points may exist on the surface of the heating elements
during the first few minutes after it is turned on.
not affect the performance of the unit.
C
26.
hildren of less than 3 years should be kept away unless continuously
supervised.
C
27.
hildren aged from 3 years and less than 8 years shall only switch
on/off the appliance provided that it has been placed or installed in its
intended normal operating position and they have been given
supervision or instruction concerning use of the appliance in a safe way
and understand the hazards involved.
less than 8 years shall not plug in, regulate and clean the appliance or
perform user maintenance.
CAUTION — S
28.
ome parts of this product can become very hot
and cause burns.
P
29.
articular attention has to be given where children and vulnerable
people are present.
Assembling Process
Step 1: Connect the bottom tube with base by screwing them
together.
T
his is normal, and will
C
hildren aged from 3 years and
Step 2: Screw the middle tube with the bottom tube.
Step 3: Feed the Power Cord through the Base and the Bottom Tube,
middle tube ,and pull through around 2m of cable.
Step 4: Place the power cord plug through base, bottom pole, middle
Pole and top pole. Connect the power cord plug to the socket in the
heater head.
Step 5 Push the heater head onto the top hollow tube and fix it in
position using the supplied 2 X M4*8 screws.

Publicidad

loading