Publicidad
Idiomas disponibles
Idiomas disponibles
CHANNEL 1&2 CONTROL PANEL
1. PHANTOM POWER SWITCH +48V
Press this switch when using a phantom-powered condenser
microphone in channel 1 or 2. When this switch is on, the LED light
indicates that the unit is supplying DC+48V phantom power to the
input jacks.
2. GAIN CONTROL
Turn to adjust the gain applied to the input signal level of channels
1 and 2.
3. TREBLE CONTROL
Turn to adjust the high frequency tones of channels 1 and 2.
4. BASS CONTROL
Turn to adjust the low frequency tones of channels 1 and 2.
5. FX SWITCH
Press to assign the possibility of delay FX to the corresponding
channel (1 & 2).
6. MONO/STEREO SWITCH
MONO: Sound input to channels 1/L or 2/R can be heard from both
the right and left speakers. If you use the 1/L or 2/R individually, set
the switch to this setting.
STEREO: Sound input to channel 1/L can be emitted by the left
speaker only, and input from channel 2/R can be emitted to the
right speaker only.
7. VOLUME LEVEL CONTROLS
Turn to adjust the volume balance between both channels.
STEREO INPUT & MP3 LEVEL CONTROL
1. TREBLE CONTROL
Turn to adjust the high frequency tones of the stereo input channel.
2. BASS CONTROL
Turn to adjust the low frequency tones of the stereo input channel.
3. STEREO INPUT VOLUME LEVEL CONTROL
Turn to adjust the stereo line input volume level.
4. MP3 VOLUME LEVEL CONTROL
Turn to adjust the MP3 volume level.
BT CONNECTION
1.
Activate the BT-function on your device (mobile phone, tablet etc.) from which you want to play the music. See the
operating instructions for that device.
Select "VMM" on your BT-device and make the BT-connection.
2.
No password is required.
Attention: The BT distance is approx. 10 meter without any barrier.
5
Publicidad
