True A20 Manual De Instrucciones página 6

How do I pair two headphones with my phone?
· Please make sure both the earbuds and the charging case are fully charged before first use.
· Step �
Take both earbuds out of the charging case and both earbuds will power on and
start pairing automatically (If the earbuds are not connected to your device for
more than � minutes,the earbuds will automatically turn off Press the MFB button
for about � seconds to manually turn on the earbuds when prompted "Power on".)
The indicator light of one earbud will flash white and blue alternately, and the
indicator light of the other earbud will slowly flash blue when paired successfully
· Step �
Enable the Bluetooth pairing mode on your phone device, search and select "A��" to
connect. (You should hear a voice prompt "Connected" when wearing earbuds).
· If indicator light of earbud is off,it means the phone is connected
· How to use the reset button?
After opening the cover, press and hold the reset button for �s, the left and right
earphones start to light up blue and white, and then let go.
The headset will then turn off. After turning off the headset, take out the headset
and manually turn it on again to pair it again.
· Automatic connection
By default, the earbuds will connect the last paired phone automatically when power on.
· Prompt
�. If you have any problem pairing the two earbuds with your phone, put the earbuds
back in the charging case and repeat the above steps.
�. These earbuds can be used not only together, but also individually
If you want to use single earbud, just take one earbud out of the case and connect it
to your phone. or when using two earbuds, manually turn off one earbud or put
one back in the charging case and you'll be able to use the other one earbud alone.
�� EN