Perlesmith PSLFK3 Manual De Instrucciones página 8

2B-3
2B-4
01
STEP 3 Install Front support [02] and extensions [03] and End cap [05] together.
3-1
Install the extensions [03] to Front support [02] withe the pre-assembled screws.
3-2
Install the extensions [03] to Front support [02] withe the pre-assembled screws.
Pre-assembled scews
P7
IMPORTANT:
in. (70 mm). Be sure to drill into the center of the stud.
A
02
02
Drill pilot holes using a 7/32 in. (5.5 mm)
diameter drill bit.
Pilot holes must be
Install wall plate
and washer
until until they are pulled firmly against
A
the wall plate
B
03
Pre-assembled scews
03
05
in. (70 mm)
drilled to a depth of
using lag bolts
01
. Tighten the lag bolts
B
.
01
05
Finished
A