ledscom LC-EL-097-W Instrucciones De Montaje página 5

1. Disconnect the building-side connecting
cable from the power supply and secure it
against being switched on again. To do
this, trip the corresponding circuit breaker
of the house installation.
2. Loosen the two screws (1) take the lamp
(2) out of the mounting pot (3).
3. Cut or pierce a cable opening at one of
the perforations (4) provided for this
purpose in the installation pot.Then guide
the connection cable on the building side
through the cable opening and place the
installation pot (3) in the installation
opening provided for this purpose. Fix the
installation pot (3).
4. Connect the building-side connection
cable to the cable of the luminaire
according to Figure 1.
5. Put the lamp (2) back into the mounting
pot ,fix it with the two screws (1) and press
the cover (5) onto the lamp so that it snaps
into place.
6. Turn the power back on. The installation
is now complete.
Subject to technical changes
LEDs Com GmbH, Dohrweg 2a, D-41066 Mönchengladbach, www.leds-com.de, Tel. +49 (0) 2161 - 5 75 99 76
English
Figure 1
1: Screws
2: Luminaire
3: Installation pot
Figure 2
Staircase light (LC-EL-097-W) - Assembly instructions
4: Perforation for cable opening
5: Aperture
11/2022