Tosai SRE 300 Instrucciones página 40

LIST OF PARTS
Control Panel/ Indicators for SRE 300
*All indicators are illustrated "lit" status for descriptions.
ODOR-FREE LAMP
The lamp is lit: Odor-free system
is activating at the
Ignition or at the
extinction
CHILD SAFETY KEY
On/off the safety function.
TIMING
TIMING KEY
Use when setting the desired com-
bustion hour after the unit operates
at programmed time.
At each pressing of timing
key, indication changes as follows:
[--h] Combustion goes as follows;
[10h] 10 hours of combustion
[ 9h] 9 hours of combustion
. .
. .
. .
[ 1h] 1 hour of combustion
POWER SELECTOR KEY
Use MIN/AUTO/SAVE for using pur-
pose respectively.
45 46
INDICATOR
KEY
Temperature,
programmed time can be selected to in-
dicate.
50
49
47
TIMER CONTROL KEY (TIMER LAMP)
For time setting of TIMER, the switch TIMER is light
green: timer operation is in stand-by status.
SELECTOR
current time,
TEMPERATURE ADJUSTMENT KEY
Use when setting the desired temperature.
higher temperature
lower temperature
TIME ADJUSTMENT KEY
Use when setting current time and/or the timer.
time ahead
time back
"ON" KEY (OPERATION LAMP)
Use when starting the heater operation.
The lamp is lit (red): under operation, pre-heating
The lamp is flashing (red) + buzzer: flame is extin-
guished and the display shows a
code error or an alarm.
38
OFF BUTTON
Stops the
timer-
operation.
47
48 49
45
49
38
56