KNOW YOUR JUICER
Pusher
Juicer cover
Filter basket
Juice collector
Juice outlet
Safe-button
Pulp container
Body
Switch
Juice cup
USING YOUR JUICER
Preparation of food
- Remove stones (plums, peaches, cherries etc).
- Remove tough skins (melons, pineapples, cucumbers, potatoes etc).
- Soft-skinned and other foods just need washing
ASSEMBLY AND USE
1. Fit the pulp collector.
2. Fit the filter basket to the motor drive coupling and push down until it into place. Ensure the filter basket is fitted securely
inside the juice collector.
3. Place the juicer cover over the juice collector.
4. Lock the safe-button, and make sure it is locked completely.
5. Slide the food pusher down the feed chute by aligning the groove in the food pusher with the small protrusion on the inside
of the top of the feed tube.
6. Place the pulp container into position by tilting slightly.
7. Place the juice cup under the juice outlet.
8. Cut the food into small pieces to fit the feed tube.
9. Switch on and push down with the pusher. Use speed 1(low speed) for softer food and use speed 2(high speed) for harder food.
10. Some very hard foods may make your juicer slow down or stop. If this happens,
turn off the appliance and unblock the filter.
11. Switch off and clean the pulp collector regularly during use.
ALWAYS UNPLUG AFTER USE
TAKE YOUR JUICER APART
REVERSE THE ASSEMBLY PROCEDURE TO TAKE THE JUICER APART.