Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Operation
Power switch
Seasoning the Cooking Surfaces
The cooking plate surfaces need to be 'seasoned' before using for the first time.
1. Ensure the cooking surfaces are clean.
2. Brush the surfaces with cooking oil.
3. Set the thermostat(s) to 110°C and turn the appliance On. The power indicator light turns on.
4. Once the appliance reaches temperature the power indicator light turns off.
5. Turn the appliance Off and allow it to cool before wiping away any excess oil.
6. The appliance is now ready to use.
Cooking
1. Close the plates.
Note: It may be necessary to slightly grease the plates with cooking oil before cooking
•
depending on the foodstuff.
2. Set the thermostat(s) to the desired temperature (60°C-300°C) and turn the appliance On. The power
indicator light(s) turn on.
•
Note: 200°C to 220°C is suitable for general cooking.
3. The power indicator light(s) turn Off when the appliance has reached the set temperature.
4. Lift the top plate and place the foodstuff on the bottom plate.
5. Lower the top plate.
Note: All BUFFALO Contact Grills feature counter-balanced top plates that allow
for even cooking.
Note: With the new treatment for the flat plates, the surfaces now are smoother
and thus better for cooking and cleaning. Whereas, the initial surfaces may
appear to have ribbed markings with the first time use. After several hours of
cooking, such markings will start to fade/disappear.
4
FC380-FC386_ML_A5_v3 20220613.indb 4
FC380-FC386_ML_A5_v3 20220613.indb 4
Digital timer
Handle
Top plate
Bottom plate
Waste Tray
Thermostat
Power indicator light
2022/6/13 下午5:38
2022/6/13 下午5:38
Publicidad
