Ipuro AIR SONIC NA-405-150 Manual De Instrucciones página 46

FUNCTIONALITY
REMOTE CONTROL
On/Off
Adjust light intensity
Adjust diffusion intensity
Power button:
1st Press: Continuous diffusion (medium level) + warm light (high intensity)
2nd Press: Turn all functions off
Light button:
Already at warm white light when device is turned on.
1st Press: colour changing light
2nd Press: fixed light (stops on current light colour)
3rd Press: light off
4th Press: warm white light
(Following this cyclic)
When operating the light function without Diffusion.
1st Press: warm white light
2nd Press: colour changing light
3rd Press: fixed light (stops on current light colour)
4th Press: light off
(Following this cyclic)
Dim light button:
Already at high warm light intensity when device is turned on.
1st Press: medium level
2nd Press: low level
3rd Press: high level
(Following this cyclic)
The brightness of the coloured light can be changed if a light colour has been permanently selected via the light mode key.
Diffusion volume button:
Already at medium level diffusion when device is turned on.
1st Press: high level diffusion (30 ml +/- 5 ml per hr). Warm white light flashes 3 times for indication.
2nd Press: low level diffusion (10 ml +/- 3 ml per hr). Warm white light flashes once for indication.
3rd Press: medium diffusion (20 ml +/- 5 ml per hr). Warm white light flashes twice for indication.
(Following this cyclic)
Diffusion intermittent/continuous button:
Already at continuous diffusion when the device is turned on.
1st Press: intermittent mode: 30 seconds intervals
2nd Press: diffusion off
3rd Press: continuous mode
(Following this cyclic)
90
Adjust light mode
Adjust diffusion mode
MAX
BUTTONS AT BASE (BASE UNIT)
There are two back-up buttons located underneath the base.
(Please use the remote control for the main operation.)
ON/OFF BUTTON
LIGHT BUTTON
The diffuser will stop misting when water level becomes too low.
Always disconnect adapter from electrical outlet when not in use.
MAINTENANCE
Fragrance oil and essential oil residues can build up in the water tank of the diffuser. It is recommended to clean your diffuser every
3 days for a unit that is continuously in use or before changing oils.
Important care instructions:
Hand wash only. Never place in dishwasher.
Never immerse the diffuser in water.
Always unplug the diffuser when not in use.
Steps for cleaning:
1. Turn off the diffuser and unplug from the power source.
2. Remove the top and inner covers.
3. Empty any water left in the unit by pouring the water out from the back of the unit. Avoid water flowing across the air outlet.
4. Use a clean, damp, soft cloth to clean the unit to remove all traces of fragrance or oil built up in the water tank. Do not use cor-
rosive or abrasive cleaners or chemicals. If the mist plate is clogged, gently and carefully rub the ceramic disc with a cotton bud,
making sure not to scratch it. If required to remove heavy oil residue, add a few drops of isopropyl or white vinegar mixed with
water. Pour the mix into the water tank and wipe with a clean cloth. Once this step is finished, empty the mix out, avoiding the
air outlet. Rinse with clear water and let it dry.
Now your diffuser is clean and ready for use.
Air outlet
Empty the water in the opposite way to the air
outlet. Do not empty the water in the air outlet,
this would damage the diffuser.
ON/OFF button:
1st Press: diffusion on (continous diffusion at medium level)
2nd Press: diffusion off
Light button:
1st Press: warm white light (high intensity)
2nd Press: light off
91