Logic3 Freebird Wireless ThumbStick Manual Del Usuario página 2

Charging of Freebird Wireless ThumbStick Controller
The Wireless ThumbStick Controller has a built in rechargeable battery which needs to be
recharged before usage.
1. Connect the USB side of the charging cable to the USB Port of the Wii.
2. Plug the other side of the charging cable to the Wireless ThumbStick Controller.
3. Turn ON the Wii Console (make sure not in Standby mode)
4. The LED on the Wireless ThumbStick Controller will then illuminate Green
5. The LED will turn OFF once the battery is fully charged.
Setup of Receiver
1. Remove the wrist strap of your Wii Remote.
2. Connect the Receiver to the bottom of the Wii Remote (Simply by pushing it on)
3. Attach the wrist strap to the Wii Remote (Feed the string through the Wii Remote and the
receiver and loop the strap through)