Publicidad
Party 212
IMPORTANT SAFETY SYMBOLS
lntended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
lntended to alert the user of the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
CAUTION: Risk of electrical shock - DO NOT OPEN!
CAUTION: To reduce the risk of electric shock, do not remove cover. No user serviceable
parts inside. Refer servicing to qualified service personnel.
WARNING: To prevent electrical shock or fire hazard, this apparatus should not be exposed
to rain or moisture, and objects filled with liquids, such as vases,should not be placed on this
apparatus. Befare using this apparatus, read the operating guide for further warnings.
Protective earthing terminal. The apparatus should be connected to a mains
socket outlet with a protective earthing connection.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using electrical products, basic cautions should always be followed,
including the following:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. lnstall in accordance with manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding plug. The wide blade or third prong is provided for your safety. lf the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point they exit from the apparatus.
11. Only use attachments/ accessories provided by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
1
CAUTION
2. Line in (XLR & RCA): enchufe el cable con conectores para obtener la señal del
reproductor de CD u otros dispositivos.
3. Line out (XLR & 1/4" jack): enchufe el cable con conectores para enviar la señal a otra
caja de altavoz activa o amplificador.
4. MP3 Vol: sube/baja la salida de volumen del reproductor de mp3.
5. Mic Vol: sube/baja el volumen dinámico del micrófono.
6. Line Vol: sube/baja el volumen de la entrada de línea.
7. Main Volume: suba o baje el volumen de toda la caja del altavoz.
8. Ecualizador de 2 bandas
Agudos: esta perilla se usa para ajustar la frecuencia alta
Bass: esta perilla se usa para ajustar la frecuencia baja
9. Indicador de límite y potencia
Límite: cuando la señal es demasiado, el indicador de límite se iluminará, baje el volumen
Indicador de encendido: cuando está encendido, el producto comienza a funcionar.
10. Salida de altavoz: enchufe el cable del altavoz y la señal de salida a la caja de altavoz
pasiva a 8 ohmios.
11. Interruptor de encendido: enciende/apaga el producto.
12. Toma de CA y portafusibles
Utilice el cable de alimentación correcto para obtener el voltaje correcto de la fuente de
alimentación de CA.
Reemplace el fusible con la especificación correcta cuando el fusible esté roto en el
portafusibles.
13. Interruptor LED: enciende/apaga la iluminación RGB en la parte delantera.
14. instrucción MP3
(1) Modo: presione el botón Modo para elegir los modos de trabajo en el reproductor de
mp3 como USB/SD/FM/Bluetooth
(2) Reproducir/Pausar: presione este botón para reproducir el reproductor de mp3 o pausar
el reproductor de mp3, cuando el reproductor de mp3 funcione en modo FM, presione este
botón para escanear las estaciones automáticamente
(3) Detener: presione este botón para detener el reproductor de mp3.
(4) Reciclar: presione este botón para reproducir música reciclar
(5) Hacia atrás: presione este botón para reproducir la última canción o buscar la última
estación de FM
(6) Adelante: presione este botón para reproducir la siguiente canción o buscar la siguiente
estación FM
USER´S
MANUAL
MANUAL
DE USUARIO
2
Publicidad
