Descargar Imprimir esta página

Lindy 43278 Manual De Usuario página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

User Manual
Introduction
Thank you for purchasing the DST-Mini Plus. This product has been designed to provide trouble free,
reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To
ensure correct use, please read this manual carefully and retain it for future reference.
The DST-Mini Plus with VGA is a compact, multifunctional solution for hybrid workers. Housed in a robust
aluminium with a high-quality braded USB-C cable, this laptop docking station has been designed for
durability during travel. With support for HDMI and VGA, this product is ideal for those who have a legacy
monitor they wish to plug their device into.
Package Contents
DST-Mini Plus
This manual
Features
Compatible with USB Type C equipped computers with DisplayPort Alternate Mode support
Input: USB Type C connector – male, 1x USB Type C female (only for charging, no data transfer)
Output: HDMI A female, VGA female, 3x USB Type 3.2/ 3.1 Gen 1 / 3.0 Type A female, RJ45 female,
SD and microSD card slot
USB 3.2 / 3.1 Gen 1 / 3.0 standard (5 Gbps)
Max. resolution: 3840x2160 30Hz (HDMI), 1920x1080 60Hz (VGA)
Works as a splitter if both VGA and HDMI are connected at the same time, max. resolution
1920x1080@60Hz with the same video content
10/100/1000Mbps Gigabit Ethernet
USB Type C Power Delivery input port for charging (no data transfer) with max. 100W (20V / 5A)
Special Features: DisplayPort Alternate Mode, Supports MAC Address pass through (this feature is
dependent upon the compatibility of the hardware used in each set up)
Installation & Operation
The DisplayPort Alternate Mode uses the USB C connector as a video output without the need for
additional drivers or software. Please check that your computer supports this feature.
To begin using the DST-Mini Plus simply connect the USB Type C male connector to the USB Type C port
of your computer. Any required drivers will be automatically downloaded from the internet. Then connect
the HDMI socket and/or VGA socket of the DST-Mini Plus to the HDMI/VGA port of your monitor using
appropriate male to male cables (not included). Use a standard RJ45 Ethernet cable (not included) to
connect to your network. Additional USB devices can be connected to the USB Type A ports of the DST-
Mini Plus, USB 5Gbps data transfer rates are supported whilst legacy USB 2.0/1.1 devices may also be
connected. The SD and microSD card slots allow access to SD and micro SD cards.
By connecting a compatible USB Type C power supply (not included) it is also possible to charge your
Macbook or Notebook using the Type C Power Delivery port, just connect the power supply to the Power
Delivery port when required.
Note: To use the "MAC address pass-through" feature, the setting must be enabled in the BIOS. The
location of the setting varies for each manufacturer. Change the setting to Enabled, then exit the BIOS
while saving changes to the BIOS setting.
English

Publicidad

loading