Descargar Imprimir esta página

FONESTAR PAR-189AL Manual De Usuario página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
DESCRIPTION
- LED extra-flat PAR RGBW spotlight.
- Automatic, manual (colour and white strobe adjustments), sound activation, DMX control, and master/
slave mode.
- Extra-flat design and sturdy aluminium housing.
- Double-arch mounting bracket for placement on the floor, or overhead anchorage.
- Ideal for small-medium stages, halls and events.
- Installation can be extended with cascade connection.
- Built-in microphone.
CONTROLS AND FUNCTIONS
REAR AND SIDE PANEL
1.- POWER IN: power supply.
2.- POWER OUT: power output, 4 A maximum.
3.- GND: screw for the unit's earth connection.
4.- DMX IN: control signal input, 3 pin XLR connector.
5.- DMX OUT: control signal output, 3 pin XLR connector.
6.- SCREEN: shows the current mode of operation of the device.
7.- MODE: allows you to change the mode of operation.
8.-
SET : increases/decreases the value of the selected mode. To confirm the selection, press ENTER.
9.- ENTER: confirms the current value of the configured parameter.
1
POWER
IN
2
POWER
OUT
3
GND
4
DMX IN
5
DMX OUT
MODE
SET
ENTER
PAR-189AL
7
8
9
- 2 -
6
LED PAR, 18 x 10 W
~110-240 V AC, 50/60 Hz
POWER CONSUMPTION: 200 W
C A U T IO N
RISK OF ELECTRIC SHOCK
DO NOT OPEN

Publicidad

loading