ACME BTDG40 Manual De Instrucciones página 4

GB
Overview
a) Bluetooth dongle to speaker
b) Bluetooth dongle to home-theater
1. USB plug for power in
2. "Connect/Switch" button
3. Line in
4. Line out
5. Smartphone
6. Tablet PC
Pairing the BTDG40 with a Bluetooth device
1. Place the BTDG40 and Bluetooth device where they are easily viewable, no more than
1 metre apart.
2. Plug BTDG40 into the powered USB port. LED indicator will start to blink blue.
3. Press and hold the "Connect/Switch" button for 5-6 seconds until LED flashes blue
4. According to the indication, enter password or PIN No.: "0000"
5. After successful connecting, a blue LED flashes twice every 5 seconds.
6. Connect one end of the 3.5mm stereo cable to BTDG40 audio output, another end of
the cable to the speaker's audio input.
7. Connecting with a wired audio source: connect one end of the 3.5mm stereo cable
audio source output, another end of the cable to BTDG40 audio input. To switch on
the audio source, press "Connect/Switch" button and wait for a 3-4 seconds.
Safety instructions
• Do not disassemble the product or remove any parts
• Do not put the product into water or any liquid. Should this happen, take the product
off computer and contact your vendor or after sales service center for maintenance
• Do not put the product close to heat source, or expose it to high temperature.
Waste Electrical and Electronic Equipment (WEEE) Symbol
The use of the WEEE symbol indicates that this product may not be treated
as household waste. By ensuring this product is disposed of correctly, you
will help protect contact your local authority, your household waste disposal
service provider or the shop where you purchased the product.
4