Descargar Imprimir esta página

Ipuro NA-408 Manual De Instrucciones página 47

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
MAINTENANCE
Fragrance oil and essential oil residues can build up in the water tank of the diffuser. It is recommended to clean your diffuser every
3 days for a unit that is continuously in use or before changing oils.
Important care instructions:
Hand wash only. Never place in dishwasher.
Never immerse the diffuser in water.
Always unplug the diffuser when not in use.
Steps for cleaning:
1.
Turn off the diffuser and unplug from the power source.
2. Remove the top and inner covers.
3. Empty any water left in the unit by pouring the water out from the back of the unit. Avoid water flowing across the air outlet.
4. Use a clean, damp, soft cloth to clean the unit to remove all traces of fragrance or oil built up in the water tank. Do not use cor-
rosive or abrasive cleaners or chemicals. If the mist plate is clogged, gently and carefully rub the ceramic disc with a cotton bud,
making sure not to scratch it. If required to remove heavy oil residue, add a few drops of isopropyl or white vinegar mixed with
water. Pour the mix into the water tank and wipe with a clean cloth. Once this step is finished, empty the mix out, avoiding the
air outlet. Rinse with clear water and let it dry.
Now your diffuser is clean and ready for use.
Air outlet
Empty the water in the opposite way to the
air outlet. Do not empty the water in the air
outlet, this would damage the diffuser.
TROUBLESHOOTING
Status
Possible cause(s)
Start-up Failure/Early Shutdown
Insufficient water
Improper power wire connection
Failure or abnormality of misting but the
The water exceeds the max level line
light is working
The mist plate is clogged (dust, oil,
residues...)
The air inlet is blocked
92
Solution(s)
Fill water to the max. water level
indiactor.
Unplug the power adapter plug and
reset carefully.
Empty the excess of water carefully to
the max level line.
Refer to Maintenance part for cleaning
the mist plate.
Make sure that nothing is blocking the air
inlet located at the bottom of the diffu-
ser: The device must be placed on a flat
and hard surface. If the problem remains,
please contact the customer service.
Status
Possible cause(s)
Water leakage
Top cover or inner cover are off-centered
of missing
High humidity/temperature too low or
too high
The remote is not responding
The insulation sheet is still on(first
use only)
The battery has no power
RECYCLING AND DISPOSAL
Do not dispose this product with ordinary household waste at the end of its life. Please take it to a collection point for
recycling electrical and electronic equipment. Instructions as to the correct method of disposal are provided by the symbol
on the product, in the instruction manual, or on the packaging. The materials are recyclable as indicated by the symbols.
By recycling materials or reusing old appliances in other ways, you are making an important contribution to protecting the
environment. Please ask your local council for the location of authorized disposal points.
INFORMATION FOR RETAILERS
Please keep these instructions for future reference.
For indoor use only.
European Conformity.
Gries Deco Company GmbH hereby declares that ipuro AIR SONIC aroma mood diffuser IPU1900, IPU2900 is in com-
pliance with the essential requirements of the European Electromagnetic Compatibility Directive (2014/30/EU), the
Low Voltage Directive (2014/35/EU) and the RoHS Directive 2011/65/EU.
Extra-low voltage. Equipment in fixed installations and equipment with special requirements as regards reliability and
availability.
Protective insulation. Energy consuming equipment to be supplied from a fixed installation. Household appliances
portable tools.
Detachable supply unit.
Solution(s)
Adjust the top cover and inner cover to
make sure they are properly aligned.
Adjust the room temperature of
humidity.
Gently pull on the plastic strip located at
the bottom of the remote to slide off the
battery insulation sheet.
Change to a new battery.
93

Publicidad

loading

Este manual también es adecuado para:

Ipu1900Ipu2900