1. Product overview
Water inlet
5
Control panel /
4
remote control*
Power button
1
7
* = To use the remote control, please lift from the
dock by gently pulling out from the bottom
4
Aroma tray
3
Mist outlet
2
6
Aluminum foot
8
Ambient light
2. Installation and use
Note: Please take notice of below instructions
and the separately included warning sheet before
using the product.
Installation
•
Check the voltage on the device label before
use. Only connect the device to sockets that
correspond to the voltage of the device. If you
are unsure whether your connections meet the
requirements, consult an electrician or your
Water tank
electricity supplier.
•
Do not disassemble and repair the appliance
without authorization.
•
If the power cord is damaged, in order to avoid
danger, it must be replaced by the manufacturer
or its maintenance department, and not by
yourself.;
•
If there is any abnormality, please unplug
the power cord immediately and it must be
Power cord
9
repaired by the manufacturer or its maintenance
department.
•
Regularly clean the dust on the power cord plug;
•
Before cleaning or moving, please turn off the
power and unplug the power cord;
•
When pulling the plug, hold the power plug
instead of pulling the power cord;
•
Do not touch the water and parts of the product
while the power is on;
•
Do not cover the air inlet and the mist outlet with
items such as towels;
•
This is not a toy. To avoid accidents, keep it away
from babies and children. Do not put it in a crib,
stroller or playpen. Please do not let children and
babies play and use the device;
•
Do not use the device on a sloping table, it should
be placed in a flat and stable surface;
•
Do not add flavors or similar substances
produced or supervised by the company to the
water tank and water tank in the device; You can
use the designated aroma tray underneath the lid
to add aromatherapy.
•
Do not use in the kitchen. Please keep away
from heat sources, avoid direct sunlight, and
keep away from furniture and other household
appliances 2 meters away from moisture.
Use
Installing the device
Unpack the device and remove the packing
1
materials from the device. Store the packing
materials for possible future transportation.
Plug de power cord in a wall outlet. You will
2
hear a beep and the power indicator will blink.
Press the power button to switch on the device
3
and the display will light up.
5